T76S threaded Injection Anchor Tube

High ductility T76S threaded Injection Anchor Tube

• Feature 

  ONTON^® threaded Injection Anchor Tube (Self Drilling Anchor, SDA) features a wide range of applications such as soil nails, micropiles, rock bolts, or ground anchors. It is applied to self-drilling ground control solution used in Civil Engineering and underground construction.

                                                               
  

• Applications

  Civil Engineering	Underground Mining and Tunneling
  1. Pile foundation	1. Stabilization of tunnel portals, trenches, and cut-and-cover areas
  2. Slope and embankment stabilization	2. Forepoling
  3. Reinforcement of excavation pits and retaining walls	3. Face stabilization
  4. Foundation of pylons and wind mills	4. Radial rock bolting
  5. Anchorage of avalanche protection structures and noise barriers	5. Roof and rib bolting
  6. Injection works	6. Injection works




Why choose us?














• SDA (IBO) is a kind of safety product.

• Safe products is the most important thing of engineering safety.

• We only produce safe products.

• Security is not just lip service.

  
  

  




Certifications:






Customize service:


Good Ductility checked of threaded Injection Anchor Tube on site by a bending test to 180 degrees, good machinability and drillable:






Custom process:






Packaging & Shipping:



Generally: 50 pcs anchor rock bolt per bundle, wrapped in woven bags or as requirement.




Company Information:






• Established in the early 1990s.

• The first and best manufacturer of SDA ( Self-drilling Anchor Rock Bolt ) in China.

• ONTON Techology Co., Ltd. is the main compiling units of the Chinese Railway Standard named "Technical Regulations for Hollow Bolt". 

• We participate in the ministry of railways Self-drilling Anchor Rock Bolt standards and almost all of the high-speed railway construction in china.

• OEM accepted.  




     FAQ:




     1. Standards of threaded Injection Anchor Tube:

    'EU Construction Products Directive': EN 14199:2005 Micropiles and EN 14490:2010 Soil Nails.

 

    2. What the EU standards require?

     EN 14199:2005 "Micropiles", clause 6.2.1 and EN 14490:2010 "Soil Nails", clause 6.2.2.2 require:

     Yield Stress, fyk, between 400 to 600 MPa (60 to 87 ksi)

     Ductility (Elongation Agt > 5% required by EN 10080, ASASTM A615 , ASASTM A370)

     All the required properties above are tested of Finished hollow-bar, NOT raw materials.

 

    3. What is Agt?

     Agt denotes the elongation up to ultimate load without reduction of cross-section.

     It is not to be confused with total elongation, A, up to rupture.

     Usually elongation, A, has double the value of A_gt. 




     4. What is the standard of quality for SDA? Is the higher the strength, the better?

     No, the grade of material strength is based on its yield strength. However, for the Grade of Product Quality, the key index should be its ductility (i.e. the values of A_gt and Rm/R_p0.2, according to Eurocode EC 2).




   Contact us:

   neolau@ontonbolt.com